########################################################################
#
# Ots Hardware Mapping Language (OHML) Source File
#
# Hardware      : DAC-3 DJ MIDI Hardware Controller
# File Name     : (Ots) DAC-3.ohm
# Last Updated  : 12-May-2008
# OtsAV Version : 1.85.64
#
# Copyright 1996-2008 Ots Corporation
#
# IMPORTANT NOTE: This is an original file from Ots Labs. If you wish to
# make edits, it is recommended that you copy the contents of this file
# to a new file first. Should you fail to do this, your changes may be
# lost when Ots software updates are installed on your computer. If you
# need to obtain the original version of this file at a later stage,
# visit http://www.OtsAV.com
#
########################################################################



# ******* Declare variables *******


# Arguments: variable name, initial value, maximum value

!var[$deck_a_playing,0,1] # 1 = playing
!var[$deck_b_playing,0,1]
!var[$deck_a_jog_mode,0,1] # 0 = bending, 1 = scratching
!var[$deck_b_jog_mode,0,1]
!var[$deck_a_frame_search,0,1] # 1 = in frame search mode
!var[$deck_b_frame_search,0,1]
!var[$deck_a_search_spin_counter,0,7] # for dividing (by 6) jog
!var[$deck_b_search_spin_counter,0,7] # pulses when frame searching
!var[$deck_a_search_rate,0,2] # frame search speed via jog
!var[$deck_b_search_rate,0,2]
!var[$deck_a_scratch,0,1] # 1 = currently scratching
!var[$deck_b_scratch,0,1]
!var[$deck_a_bend,0,21] # non-zero = currently bending
!var[$deck_b_bend,0,21]
!var[$deck_a_bend_down,0,1] # 1 = bend down
!var[$deck_b_bend_down,0,1]
!var[$deck_a_bend_up,0,1] # 1 = bend up
!var[$deck_b_bend_up,0,1]
!var[$deck_a_scratch_state,0,2] # tracks jog wheel state for scratching
!var[$deck_b_scratch_state,0,2]
!var[$deck_a_bend_state,0,1] # tracks jog wheel state for bending
!var[$deck_b_bend_state,0,1]
!var[$deck_a_slider_index,0,1] # 0 = tempo, 1 = pitch
!var[$deck_b_slider_index,0,1]
!var[$deck_a_shift,0,1] # shift A button state
!var[$deck_b_shift,0,1] # shift B button state
!var[$global_shift,0,1] # global shift state
!var[$playlist_down_button_count,0,7] # deck a playlist down button held counter
!var[$playlist_up_button_count,0,7] # deck a playlist up button held counter



# ******* Declare subroutines *******


!sub[@deck_a_try_bend] # this sub is used purely to gain
!sub[@deck_b_try_bend] # use of another conditional
!sub[@deck_a_try_scratch]
!sub[@deck_b_try_scratch]
!sub[@deck_a_try_scratch2]
!sub[@deck_b_try_scratch2]
!sub[@deck_a_jog_val_bend]	# important to use sub for midi.velval-based
!sub[@deck_b_jog_val_bend]	# controls which call more than one command
							# in order to be efficient (CPU resources)
!sub[@deck_a_jog_val_scratch]
!sub[@deck_b_jog_val_scratch]
!sub[@deck_a_cue_no_shift]
!sub[@deck_b_cue_no_shift]
!sub[@deck_a_slider_val] # new value from slider
!sub[@deck_b_slider_val]
!sub[@deck_a_slider_val_tempo]
!sub[@deck_b_slider_val_tempo]
!sub[@deck_a_slider_val_pitch]
!sub[@deck_b_slider_val_pitch]
!sub[@playlist_down_pressed]
!sub[@playlist_down_released]
!sub[@playlist_up_pressed]
!sub[@playlist_up_released]
!sub[@deck_a_playlist_loadnext] # load next item from playlist if
!sub[@deck_b_playlist_loadnext] # deck is not currently playing



# ******* Initialisation *******


# Called by OHM subsystem at startup.
# Place any code here that is important to maintain state at launch

sub[@_init] {
# get current OtsAV state
	avStateRequest() # will generate appropriate Load, Play, etc events
	avPlaylistNav(E) # enable Playlist Navigation and default to Playlist Area
}



# ******* Respond to OtsAV/other events *******


########################################################
####### Deck A: Load/Cue/Play-Pause/Frame Search/etc
av[Play,A,E] { # Deck A Play (entered Playing state)
	VarSet($deck_a_playing,1) # save state for our own use
}
av[Play,A,D] { # Deck A Stop (left Playing state)
	VarSet($deck_a_playing,0) # clear state
}
av[FrameSearch,A,E] { # Deck A entered Frame Search mode
	VarSet($deck_a_frame_search,1) # save state for our own use
	VarSet($deck_a_search_spin_counter,3)
}
av[FrameSearch,A,D] { # Deck A left Frame Search mode
	VarSet($deck_a_frame_search,0) # clear state
}

####### Deck B: Load/Cue/Play-Pause/Frame Search/etc
av[Play,B,E] { # Deck B Play (entered Playing state)
	VarSet($deck_b_playing,1) # save state for our own use
}
av[Play,B,D] { # Deck B Stop (left Playing state)
	VarSet($deck_b_playing,0) # clear state
}
av[FrameSearch,B,E] { # Deck B entered Frame Search mode
	VarSet($deck_b_frame_search,1) # save state for our own use
	VarSet($deck_b_search_spin_counter,3)
}
av[FrameSearch,B,D] { # Deck B left Frame Search mode
	VarSet($deck_b_frame_search,0) # clear state
}


########################################################
####### Deck A: Primary transport controls
midi.trigger[0x90:0x1F:0x7F,0xFF:0xBF:0xFF] { # Deck A Play/Pause button down (midi.trigger with mask)
	($global_shift=0)	avPlayPause(A,E)
	($global_shift=1)	avPlay(A)
}
midi.trigger[0x90:0x1F:0x00,0xFF:0xBF:0xFF] { # Deck A Play/Pause button up
	avPlayPause(A,D)
}
midi.trigger[0x90:0x1E:0x7F,0xFF:0xBF:0xFF] { # Deck A Cue button down
	($global_shift=0)	SubCall(@deck_a_cue_no_shift)
	($global_shift=1)	avCueSet(A)
}
sub[@deck_a_cue_no_shift] { # Deck A Cue button down without shift
	($deck_a_scratch=0)	avCue(A,E)
	($deck_a_scratch=1)	avCueSet(A)
}
midi.trigger[0x90:0x1E:0x00,0xFF:0xBF:0xFF] { # Deck A Cue button up
	avCue(A,D)
}
midi.trigger[0x90:0x18:0x7F] { # Deck A Frame Search (back) button down
	avFrameSearch(A,-1)
}
midi.trigger[0x90:0x19:0x7F] { # Deck A Frame Search (forward) button down
	avFrameSearch(A,+1)
}
midi.trigger[0xB0:0x04:0x01]	($deck_a_frame_search=1)	VarDec($deck_a_search_spin_counter)
midi.trigger[0xB0:0x04:0x7F]	($deck_a_frame_search=1)	VarInc($deck_a_search_spin_counter)
var.set[$deck_a_search_spin_counter=0] {
	($deck_a_search_rate=0)	avFrameSearch(A,-1)
	($deck_a_search_rate=1)	avFrameSearch(A,-5)
	($deck_a_search_rate=2)	avFrameSearch(A,-20)
	VarInc($deck_a_search_rate)
	VarSet($deck_a_search_spin_counter,6)
}
var.set[$deck_a_search_spin_counter=7] {
	($deck_a_search_rate=0)	avFrameSearch(A,+1)
	($deck_a_search_rate=1)	avFrameSearch(A,+5)
	($deck_a_search_rate=2)	avFrameSearch(A,+20)
	VarInc($deck_a_search_rate)
	VarSet($deck_a_search_spin_counter,1)
}
timer.tick	VarDec($deck_a_search_rate)

####### Deck B: Primary transport controls
midi.trigger[0x90:0x3F:0x7F,0xFF:0xBF:0xFF] { # Deck B Play/Pause button down (midi.trigger with mask)
	($global_shift=0)	avPlayPause(B,E)
	($global_shift=1)	avPlay(B)
}
midi.trigger[0x90:0x3F:0x00,0xFF:0xBF:0xFF] { # Deck B Play/Pause button up
	avPlayPause(B,D)
}
midi.trigger[0x90:0x3E:0x7F,0xFF:0xBF:0xFF] { # Deck B Cue button down
	($global_shift=0)	SubCall(@deck_b_cue_no_shift)
	($global_shift=1)	avCueSet(B)
}
sub[@deck_b_cue_no_shift] { # Deck B Cue button down without shift
	($deck_b_scratch=0)	avCue(B,E)
	($deck_b_scratch=1)	avCueSet(B)
}
midi.trigger[0x90:0x3E:0x00,0xFF:0xBF:0xFF] { # Deck B Cue button up
	avCue(B,D)
}
midi.trigger[0x90:0x38:0x7F] { # Deck B Frame Search (back) button down
	avFrameSearch(B,-1)
}
midi.trigger[0x90:0x39:0x7F] { # Deck B Frame Search (forward) button down
	avFrameSearch(B,+1)
}
midi.trigger[0xB0:0x06:0x01]	($deck_b_frame_search=1)	VarDec($deck_b_search_spin_counter)
midi.trigger[0xB0:0x06:0x7F]	($deck_b_frame_search=1)	VarInc($deck_b_search_spin_counter)
var.set[$deck_b_search_spin_counter=0] {
	($deck_b_search_rate=0)	avFrameSearch(B,-1)
	($deck_b_search_rate=1)	avFrameSearch(B,-5)
	($deck_b_search_rate=2)	avFrameSearch(B,-20)
	VarInc($deck_b_search_rate)
	VarSet($deck_b_search_spin_counter,6)
}
var.set[$deck_b_search_spin_counter=7] {
	($deck_b_search_rate=0)	avFrameSearch(B,+1)
	($deck_b_search_rate=1)	avFrameSearch(B,+5)
	($deck_b_search_rate=2)	avFrameSearch(B,+20)
	VarInc($deck_b_search_rate)
	VarSet($deck_b_search_spin_counter,1)
}
timer.tick	VarDec($deck_b_search_rate)


########################################################
####### Deck A: Jog mode/Bending/Scratching
var.set[$deck_a_jog_mode=0]	{ # Bending mode
	($deck_a_scratch=1)	VarSet($deck_a_scratch,0) # cancel scratching if enabled
}
var.set[$deck_a_jog_mode=1]	{ # Scratching mode
	($deck_a_bend=1)	VarSet($deck_a_bend,0) # cancel bending if enabled
}
var.set[$deck_a_playing=0] { # Deck A Stop (left Playing state)
	($deck_a_bend=1)	VarSet($deck_a_bend,0) # cancel bending if enabled
	($deck_a_bend_down=1)	VarSet($deck_a_bend_down,0) # cancel bend down if enabled
	($deck_a_bend_up=1)	VarSet($deck_a_bend_up,0) # cancel bend up if enabled
	($deck_a_scratch=1)	VarSet($deck_a_scratch,0) # cancel scratching if enabled
}
var.set[$deck_a_frame_search=1] { # Deck A entered Frame Search mode
	($deck_a_bend=1)	VarSet($deck_a_bend,0) # cancel bending if enabled
	($deck_a_scratch=1)	VarSet($deck_a_scratch,0) # cancel scratching if enabled
}
sub[@deck_a_try_scratch]	($deck_a_playing=1)	SubCall(@deck_a_try_scratch2)
sub[@deck_a_try_scratch2] {
	($deck_a_frame_search=0)	VarSet($deck_a_scratch,1)
}
var.set[$deck_a_scratch=1] { # Enable Deck A scratching
	avScratch(A,E,0.0)
}
var.set[$deck_a_scratch=0] { # Disable Deck A scratching
	avScratch(A,D,0.0)
}
sub[@deck_a_try_bend]	($deck_a_frame_search=0)	VarSet($deck_a_bend,1)
var.set[$deck_a_bend=1] { # Enable Deck A jog bending and cancel Deck A bending buttons
	($deck_a_bend_down=1)	VarSet($deck_a_bend_down,0) # cancel bend down if enabled
	($deck_a_bend_up=1)	VarSet($deck_a_bend_up,0) # cancel bend up if enabled
	avBend(A,E,0.0)
}
var.set[$deck_a_bend=0] { # Disable Deck A jog bending
	avBend(A,D,0.0)
}
var.set[$deck_a_shift=1] { # Enable Scratching jog mode
	VarSet($deck_a_jog_mode,1)
}
midi.velval[C,0xB0:0x04,0x01,0x7F,10.0,0.2,$deck_a_bend_state,0,0xFF:0xFE]	($deck_a_jog_mode=0)	SubCall(@deck_a_jog_val_bend)
midi.velval[C,0xB0:0x04,0x01,0x7F,6.5,0.35,$deck_a_scratch_state,0,0xFF:0xFE]	($deck_a_jog_mode=1)	SubCall(@deck_a_jog_val_scratch)
sub[@deck_a_jog_val_bend] { # new value from jog wheel
	($deck_a_bend=1)	avBendSet(A,_)
}
var.set[$deck_a_bend_state!=0] { # jog wheel active in bending mode
	($deck_a_playing=1)	SubCall(@deck_a_try_bend)
}
var.set[$deck_a_bend_state=0] { # jog wheel inactive in bending mode
	VarSet($deck_a_bend,0) # cancel bending
}
sub[@deck_a_jog_val_scratch] { # new value from jog wheel
	($deck_a_scratch=1)	avScratchSet(A,_)
}
var.set[$deck_a_scratch_state!=0] { # jog wheel active in scratching mode
	($deck_a_shift=1)	SubCall(@deck_a_try_scratch)
}
var.set[$deck_a_scratch_state!=1] { # jog wheel inactive in scratching mode
	($deck_a_shift=0)	VarSet($deck_a_jog_mode,0) # return to bending mode if shift has been already released
}
var.set[$deck_a_shift=0] { # Cancel Deck A scratching if shift button released and jog is inactive
	($deck_a_scratch_state!=1)	VarSet($deck_a_jog_mode,0) # return to bending mode
}
midi.trigger[0x90:0x06:0x7F]	($deck_a_playing=1)	VarSet($deck_a_bend_down,1)
midi.trigger[0x90:0x06:0x00]	($deck_a_bend_down=1)	VarSet($deck_a_bend_down,0)
midi.trigger[0x90:0x07:0x7F]	($deck_a_playing=1)	VarSet($deck_a_bend_up,1)
midi.trigger[0x90:0x07:0x00]	($deck_a_bend_up=1)	VarSet($deck_a_bend_up,0)
var.set[$deck_a_bend_down=1] {
	($deck_a_bend=1)	VarSet($deck_a_bend,0) # cancel bending if enabled
	($deck_a_bend_up=1)	VarSet($deck_a_bend_up,0) # cancel bend up if enabled
	avBend(A,E,-0.4) # bend down at 4%
}
var.set[$deck_a_bend_down=0] {
	avBend(A,D,0.0) # cancel bend down
}
var.set[$deck_a_bend_up=1] {
	($deck_a_bend=1)	VarSet($deck_a_bend,0) # cancel bending if enabled
	($deck_a_bend_down=1)	VarSet($deck_a_bend_down,0) # cancel bend down if enabled
	avBend(A,E,+0.4) # bend up at 4%
}
var.set[$deck_a_bend_up=0] {
	avBend(A,D,0.0) # cancel bend up
}

####### Deck B: Jog mode/Bending/Scratching
var.set[$deck_b_jog_mode=0]	{ # Bending mode
	($deck_b_scratch=1)	VarSet($deck_b_scratch,0) # cancel scratching if enabled
}
var.set[$deck_b_jog_mode=1]	{ # Scratching mode
	($deck_b_bend=1)	VarSet($deck_b_bend,0) # cancel bending if enabled
}
var.set[$deck_b_playing=0] { # Deck B Stop (left Playing state)
	($deck_b_bend=1)	VarSet($deck_b_bend,0) # cancel bending if enabled
	($deck_b_bend_down=1)	VarSet($deck_b_bend_down,0) # cancel bend down if enabled
	($deck_b_bend_up=1)	VarSet($deck_b_bend_up,0) # cancel bend up if enabled
	($deck_b_scratch=1)	VarSet($deck_b_scratch,0) # cancel scratching if enabled
}
var.set[$deck_b_frame_search=1] { # Deck B entered Frame Search mode
	($deck_b_bend=1)	VarSet($deck_b_bend,0) # cancel bending if enabled
	($deck_b_scratch=1)	VarSet($deck_b_scratch,0) # cancel scratching if enabled
}
sub[@deck_b_try_scratch]	($deck_b_playing=1)	SubCall(@deck_b_try_scratch2)
sub[@deck_b_try_scratch2] {
	($deck_b_frame_search=0)	VarSet($deck_b_scratch,1)
}
var.set[$deck_b_scratch=1] { # Enable Deck B scratching
	avScratch(B,E,0.0)
}
var.set[$deck_b_scratch=0] { # Disable Deck B scratching
	avScratch(B,D,0.0)
}
sub[@deck_b_try_bend]	($deck_b_frame_search=0)	VarSet($deck_b_bend,1)
var.set[$deck_b_bend=1] { # Enable Deck B jog bending and cancel Deck A bending buttons
	($deck_b_bend_down=1)	VarSet($deck_b_bend_down,0) # cancel bend down if enabled
	($deck_b_bend_up=1)	VarSet($deck_b_bend_up,0) # cancel bend up if enabled
	avBend(B,E,0.0)
}
var.set[$deck_b_bend=0] { # Disable Deck B jog bending
	avBend(B,D,0.0)
}
var.set[$deck_b_shift=1] { # Enable Scratching jog mode
	VarSet($deck_b_jog_mode,1)
}
midi.velval[C,0xB0:0x06,0x01,0x7F,10.0,0.2,$deck_b_bend_state,0,0xFF:0xFE]	($deck_b_jog_mode=0)	SubCall(@deck_b_jog_val_bend)
midi.velval[C,0xB0:0x06,0x01,0x7F,6.5,0.35,$deck_b_scratch_state,0,0xFF:0xFE]	($deck_b_jog_mode=1)	SubCall(@deck_b_jog_val_scratch)
sub[@deck_b_jog_val_bend] { # new value from jog wheel
	($deck_b_bend=1)	avBendSet(B,_)
}
var.set[$deck_b_bend_state!=0] { # jog wheel active in bending mode
	($deck_b_playing=1)	SubCall(@deck_b_try_bend)
}
var.set[$deck_b_bend_state=0] { # jog wheel inactive in bending mode
	VarSet($deck_b_bend,0) # cancel bending
}
sub[@deck_b_jog_val_scratch] { # new value from jog wheel
	($deck_b_scratch=1)	avScratchSet(B,_)
}
var.set[$deck_b_scratch_state!=0] { # jog wheel active in scratching mode
	($deck_b_shift=1)	SubCall(@deck_b_try_scratch)
}
var.set[$deck_b_scratch_state!=1] { # jog wheel inactive in scratching mode
	($deck_b_shift=0)	VarSet($deck_b_jog_mode,0) # return to bending mode if shift has been already released
}
var.set[$deck_b_shift=0] { # Cancel Deck B scratching if shift button released and jog is inactive
	($deck_b_scratch_state!=1)	VarSet($deck_b_jog_mode,0) # return to bending mode
}
midi.trigger[0x90:0x26:0x7F]	($deck_b_playing=1)	VarSet($deck_b_bend_down,1)
midi.trigger[0x90:0x26:0x00]	($deck_b_bend_down=1)	VarSet($deck_b_bend_down,0)
midi.trigger[0x90:0x27:0x7F]	($deck_b_playing=1)	VarSet($deck_b_bend_up,1)
midi.trigger[0x90:0x27:0x00]	($deck_b_bend_up=1)	VarSet($deck_b_bend_up,0)
var.set[$deck_b_bend_down=1] {
	($deck_b_bend=1)	VarSet($deck_b_bend,0) # cancel bending if enabled
	($deck_b_bend_up=1)	VarSet($deck_b_bend_up,0) # cancel bend up if enabled
	avBend(B,E,-0.4) # bend down at 4%
}
var.set[$deck_b_bend_down=0] {
	avBend(B,D,0.0) # cancel bend down
}
var.set[$deck_b_bend_up=1] {
	($deck_b_bend=1)	VarSet($deck_b_bend,0) # cancel bending if enabled
	($deck_b_bend_down=1)	VarSet($deck_b_bend_down,0) # cancel bend down if enabled
	avBend(B,E,+0.4) # bend up at 4%
}
var.set[$deck_b_bend_up=0] {
	avBend(B,D,0.0) # cancel bend up
}


########################################################
####### Deck A: Shift key
midi.trigger[0xB0:0x40:0x7F]	VarSet($deck_a_shift,1)
midi.trigger[0xB0:0x40:0x00]	VarSet($deck_a_shift,0)

####### Deck B: Shift key
midi.trigger[0xB0:0x43:0x7F]	VarSet($deck_b_shift,1)
midi.trigger[0xB0:0x43:0x00]	VarSet($deck_b_shift,0)

####### Global Shift state
var.set[$deck_a_shift=1]	VarSet($global_shift,1)
var.set[$deck_a_shift=0]	($deck_b_shift=0)	VarSet($global_shift,0)
var.set[$deck_b_shift=1]	VarSet($global_shift,1)
var.set[$deck_b_shift=0]	($deck_a_shift=0)	VarSet($global_shift,0)

####### Mix Now
midi.trigger[0xB0:0x41:0x7F]	avNext() # Mix now 


########################################################
####### Sync A and Sync B button functionality
midi.trigger[0x90:0x05:0x7F]	{ # Sync A button down
	($deck_a_slider_index=0) avBPMMatch.Tempo(A)
	($deck_a_slider_index=1) avBPMMatch.Pitch(A)
}
midi.trigger[0x90:0x25:0x7F]	{ # Sync B button down
	($deck_b_slider_index=0) avBPMMatch.Tempo(B)
	($deck_b_slider_index=1) avBPMMatch.Pitch(B)
}


########################################################
####### Tempo/Pitch Slider mode (tempo or pitch)
midi.trigger[0x90:0x04:0x7F] { # slider mode A button down
	VarIncWrap($deck_a_slider_index)
}
midi.trigger[0x90:0x24:0x7F] { # slider mode B button down
	VarIncWrap($deck_b_slider_index)
}


########################################################
####### Deck A: Slider
midi.absval[S,0xB0:0x00,0x7F,0x3F,0x00]	SubCall(@deck_a_slider_val)
midi.absval[S,0xB0:0x01,0x7F,0x3F,0x00]	SubCall(@deck_a_slider_val)
sub[@deck_a_slider_val] { # new value from slider
	($deck_a_slider_index=0)	SubCall(@deck_a_slider_val_tempo)
	($deck_a_slider_index=1)	SubCall(@deck_a_slider_val_pitch)
}
sub[@deck_a_slider_val_tempo] { # slider pos -- tempo
	($global_shift=0)	avTempoSet(A,_) # normal sync logic
	($global_shift=1)	avTempoSet(A,_,F1) # force synced state
}
sub[@deck_a_slider_val_pitch] { # slider pos -- pitch
	($global_shift=0)	avPitchSet(A,_) # normal sync logic
	($global_shift=1)	avPitchSet(A,_,F1) # force synced state
}
var.set[$deck_a_slider_index=0] {
	avTempoSet(A,0.0,F2|F7) # init sync with last pitch slider position
}
var.set[$deck_a_slider_index=1] {
	avPitchSet(A,0.0,F2|F6) # init sync with last tempo slider position
}

####### Deck B: Slider
midi.absval[S,0xB0:0x02,0x7F,0x3F,0x00]	SubCall(@deck_b_slider_val)
midi.absval[S,0xB0:0x03,0x7F,0x3F,0x00]	SubCall(@deck_b_slider_val)
sub[@deck_b_slider_val] { # new value from slider
	($deck_b_slider_index=0)	SubCall(@deck_b_slider_val_tempo)
	($deck_b_slider_index=1)	SubCall(@deck_b_slider_val_pitch)
}
sub[@deck_b_slider_val_tempo] { # slider pos -- tempo
	($global_shift=0)	avTempoSet(B,_) # normal sync logic
	($global_shift=1)	avTempoSet(B,_,F1) # force synced state
}
sub[@deck_b_slider_val_pitch] { # slider pos -- pitch
	($global_shift=0)	avPitchSet(B,_) # normal sync logic
	($global_shift=1)	avPitchSet(B,_,F1) # force synced state
}
var.set[$deck_b_slider_index=0] {
	avTempoSet(B,0.0,F2|F7) # init sync with last pitch slider position
}
var.set[$deck_b_slider_index=1] {
	avPitchSet(B,0.0,F2|F6) # init sync with last tempo slider position
}


########################################################
####### Reverse Play
midi.trigger[0x90:0x03:0x7F] { # Reverse Play Deck A button down
	avDirectionStateSet(A,T)
}
midi.trigger[0x90:0x23:0x7F] { # Reverse Play Deck B button down
	avDirectionStateSet(B,T)
}


########################################################
####### Auto DJ / ABM
midi.trigger[0x90:0x17:0x7F]	avAutoDJ(T)
midi.trigger[0x90:0x37:0x7F]	avABM(T)


########################################################
####### Playlist Navigation
midi.trigger[0x90:0x1C:0x7F]	avPlaylistNav(T) # Deck A Recordcase folder button pressed
midi.trigger[0x90:0x3C:0x7F]	avPlaylistNav(T) # Deck B Recordcase folder button pressed
midi.trigger[0x90:0x1A:0x7F]	SubCall(@playlist_down_pressed) # Deck A Recordcase down button pressed
midi.trigger[0x90:0x3A:0x7F]	SubCall(@playlist_down_pressed) # Deck B Recordcase down button pressed
sub[@playlist_down_pressed] {
	avPlaylistNav.Walk(+1)
	VarSet($playlist_down_button_count,1)
}
midi.trigger[0x90:0x1A:0x00]	SubCall(@playlist_down_released) # Deck A Recordcase down button released
midi.trigger[0x90:0x3A:0x00]	SubCall(@playlist_down_released) # Deck B Recordcase down button released	
sub[@playlist_down_released]	VarSet($playlist_down_button_count,0)
midi.trigger[0x90:0x1B:0x7F]	SubCall(@playlist_up_pressed) # Deck A Recordcase up button pressed
midi.trigger[0x90:0x3B:0x7F]	SubCall(@playlist_up_pressed) # Deck B Recordcase up button pressed
sub[@playlist_up_pressed] {
	avPlaylistNav.Walk(-1)
	VarSet($playlist_up_button_count,1)
}
midi.trigger[0x90:0x1B:0x00]	SubCall(@playlist_up_released) # Deck A Recordcase up button released
midi.trigger[0x90:0x3B:0x00]	SubCall(@playlist_up_released) # Deck B Recordcase up button released	
sub[@playlist_up_released]	VarSet($playlist_up_button_count,0)
var.set[$playlist_down_button_count=7] { # Recordcase down button held count
	avPlaylistNav.Walk(+3)
	VarSet($playlist_down_button_count,6)
}
var.set[$playlist_up_button_count=7] { # Recordcase up button held count
	avPlaylistNav.Walk(-3)
	VarSet($playlist_up_button_count,6)
}
timer.tick	($playlist_down_button_count!=0) VarInc($playlist_down_button_count)
timer.tick	($playlist_up_button_count!=0) VarInc($playlist_up_button_count)
midi.trigger[0x90:0x00:0x7F,0xFF:0xBF:0xFF]	($deck_a_playing=0)	Subcall(@deck_a_playlist_loadnext)
sub[@deck_a_playlist_loadnext] { # load next item from playlist
	($global_shift=0)	avPlaylistNav.Load(A,F1) # Load selected item
	($global_shift=1)	avLoadNext(A,F1) # Load next item
}
midi.trigger[0x90:0x20:0x7F,0xFF:0xBF:0xFF]	($deck_b_playing=0)	Subcall(@deck_b_playlist_loadnext)
sub[@deck_b_playlist_loadnext] { # load next item from playlist
	($global_shift=0)	avPlaylistNav.Load(B,F1) # Load selected item
	($global_shift=1)	avLoadNext(B,F1) # Load next item
}
av[PlaylistNav,D] {
	avPlaylistNav(T)
}